FLEX 60 Series

High frequency microwave impulses are coupled to a cable or rod and guided along the probe. The impulses are reflected by the product surface and received by the processing electronics. A micro controller identifies these level echoes measured by means of the ECHOFOX® software, evaluates them and converts them into a level information.

Due to this measuring principle, the comprehensive adjustment with the product is no longer necessary. The instruments are adjusted to the ordered electrode length. The reducible cable and rod versions are suitable for individual adaptation to the local conditions.

For a general (pdf) Catalog describing the FLEX 60 series click here.

Insensitive to dust and steam
Even process conditions such as high dust and noise generation or strong steamy atmospheres do not influence the accuracy of the measurement.

Unaffected by material fluctuations
Density fluctuations, different granulation or even fluidizing do not influence the accuracy. This applies also to the change from dry to wet gravel.

Buildup: No problem!
Strong buildup on the electrode or on the vessel wall does not affect the measuring result.

Wide application range
With measuring ranges up to 30 m, the sensors are also suitable for high vessels. Temperatures up to 150°C and pressures from vacuum up to 40 bar cover a wide application range.

Vessels with installations
By using a coaxial guide tube, VEGAFLEX 65 operates completely unaffected by vessel installations such as e.g. heating spirals or struts. A special adjustment is not necessary.